The EasySolar-II GX combines a MPPT solar charge controller, inverter/charger, and a GX monitoring hub in a single enclosure. Because all components are already pre-wired, installation is fast, tidy, and requires minimal cabling — saving both time and labour costs.
What’s Built In
MultiPlus-II inverter/charger
SmartSolar MPPT-Tr charge controller
Integrated GX device with a 2×16-character display
These components are factory-wired together inside one unit, creating a compact and streamlined energy system.
Display & Wi-Fi Control
The front display shows key system information including battery status, inverter performance, and solar charging data.
All parameters can also be monitored via any Wi-Fi-enabled device such as a laptop or smartphone.
Wi-Fi access also allows easy system setup and configuration without additional hardware.
SmartSolar MPPT Integration
The SmartSolar MPPT’s DC output is wired in parallel with the MultiPlus-II DC input.
The MultiPlus-II on/off switch also controls the SmartSolar MPPT, simplifying system management.
GX Device Connectivity
The onboard GX device provides:
The GX device communicates with:
VRM Online Portal
The EasySolar-II GX connects seamlessly to Victron’s free VRM remote monitoring platform, allowing:
Live and historical system data in easy-to-read graphs
Remote configuration and settings adjustments
Email alarm notifications and system alerts
Grid-In-Line Operation
The EasySolar-II GX intelligently manages energy flow:
Excess solar power charges the batteries or feeds back into the grid
When solar is insufficient, it supplements power from the batteries or grid
During a grid outage, the unit disconnects from the grid and keeps powering essential loads
A second AC output is available for non-critical loads that should switch off during outages. These loads are factored into PowerControl and PowerAssist functions to prevent overload and keep AC input current within safe limits.
Dimensions:
499 X 268 X 237 mm
25KG
| Category | 48/3000/35-32 MPPT 250/70 GX |
|---|
| PowerControl & PowerAssist | Yes |
| Transfer switch | 32A |
| Maximum AC Input Current | 32A |
Inverter
| Spec | 48/3000/35-32 |
|---|
| Input Voltage Range | 38–66V |
| Output Voltage (AC) | 230V ± 2% |
| Continuous Output at 25°C | 3000VA / 2400W |
| Peak Power | 5500W |
| Max Efficiency | 94% |
| Zero-Load Power | 11W |
| Zero-Load Power in AES mode | 3W |
| Zero-Load Power Search mode | 2W |
Charger
| Spec | 48/3000/35-32 |
|---|
| AC Input Voltage | 187–265V AC |
| Absorption Voltage | 57V |
| Float Voltage | 52.8V |
| Max Charge Current | 35A |
| Programmable | Yes |
| Battery Charge Algorithm | Adaptive |
| VE.Bus Communication | Yes |
| Parallel / 3-phase Support | Yes |
SmartSolar Charge Controller
| Spec | MPPT 250/70-Tr |
|---|
| Max Output Current | 70A |
| Max PV Input Power | 4000W |
| Max PV Voc | 250V |
| Max MPPT Operating Voltage | 245V |
| Charge Algorithm | Multi-stage adaptive |
| Battery Voltage | 48V |
| Protection | Yes |
General
| Specification | Detail |
|---|
| Interfaces | BMS-Can, USB, Ethernet, VE.Direct, Wi-Fi |
| Operating Temp | -20°C to +45°C (full power to 40°C) |
| Altitude | 2000m max |
| Humidity | Max 95% |
| Enclosure Material | Aluminium (Blue RAL 5012) |
| IP Rating | IP21 |
| Battery Connection | M8 Bolts |
| AC Connection | Screw terminals 16mm² (6 AWG) |
